Surface evolution and corrosion characteristics of an air-heat-treated biocompatible alloy based on TiNi
DOI:
https://doi.org/10.54708/26587572_2026_832681Keywords:
Titanium nickelide, TiNi, thermal oxidation, surface morphology, roughness, corrosion resistanceAbstract
For nickel–titanium products intended for medical applications, surface stability in physiological environments is one of the key factors determining the long-term performance of the material. Despite the presence of a naturally formed passive layer, TiNi alloys may undergo corrosion degradation, accompanied by changes in the surface state and the risk of nickel ion release. Therefore, selecting surface-treatment conditions that reduce the corrosion activity of the material without the use of complex or multistep technologies remains an important task. This study investigates the effect of heat treatment in air at 300–500 ℃ for 60 min on the morphology, elemental composition, roughness, and corrosion behavior of a cast Ti49.8Ni50.2 alloy. The sample surfaces were examined using scanning electron microscopy, energy-dispersive X-ray spectroscopy, and atomic force microscopy. Corrosion behavior was evaluated by linear sweep voltammetry in a 0.9% NaCl solution. Heat treatment at 300–400 ℃ was shown to reduce the corrosion rate to 0.08–0.12×10−3 mm/year. The most effective treatment temperature was 350 ℃, at which the corrosion rate decreased by approximately a factor of 31 compared with the untreated sample. Increasing the temperature to 450–500 ℃ produced the opposite effect because of the pronounced development of the surface topography. The correlations obtained provide a basis for understanding thermally induced surface transformations in TiNi and for selecting controlled air-oxidation conditions aimed at forming a corrosion-resistant surface state of relevance to the medical application of nickel–titanium-based alloys.References
Yuan B., Nichols S., Zhu M., Chung C.Y. Biomedical porous shape memory alloys for hard-tissue replacement materials // Materials. 11, 1716 (2018). DOI: 10.3390/ma11091716.
Otsuka K., Ren X. Physical metallurgy of Ti-Nibased shape memory alloys // Progress in Materials Science. 50, 511–678 (2005). DOI: 10.1016/j.pmatsci.2004.10.001.
Miyazaki S., Kim H.Y., Hosoda H. Development and characterization of Ni-free Ti-based shape memory and superelastic alloys // Materials Science and Engineering: A. 438–440, 18–24 (2006). DOI: 10.1016/j.msea.2006.02.054.
Otsuka K., Wayman C.M. Shape Memory Materials. Cambridge: Cambridge University Press, 1998.
Morgan N.B. Medical shape memory alloy applications – the market and its products // Materials Science and Engineering: A. 378, 16–23 (2004). DOI: 10.1016/j.msea.2003.10.326.
Pelton A.R., Schroeder V., Mitchell M.R., et al. Fatigue and durability of Nitinol stents // Journal of the Mechanical Behavior of Biomedical Materials. 1, 153–164 (2008). DOI: 10.1016/j.jmbbm.2007.08.001.
Semin V.O., D’yachenko F.A., Erkovich A.V., Ostapenko M.G., et al. Characterization of corrosion properties, structure and chemistry of titaniumimplanted TiNi shape memory alloy // Materials Characterization. 206, 113457 (2023). DOI: 10.1016/j.matchar.2023.113457.
Semin V.O., Chernova A.P., Erkovich A.V., et al. Electrochemical properties and structure of the TiNi alloy surface layers implanted with titanium and niobium ions // Inorganic Materials: Applied Research. 15(3), 636–648 (2024). DOI: 10.1134/S2075113324700060.
Nazarov D.V., Kozlova L.A., Yudintceva N.M., et al. Atomic layer deposition of biocompatible multifunctional ZnO-TiO2 nanocoatings on the surface of additively manufactured nitinol // Applied Surface Science. 675, 160974 (2024). DOI: 10.1016/j.apsusc.2024.160974.
Vikulova E.S., Karakovskaya K.I., Korolkov I.V., et al. Application of biocompatible noble metal film materials to medical implants: TiNi surface modification // Coatings. 13(2), 222 (2023). DOI: 10.3390/coatings13020222.
Mani G., Porter D., Grove K., et al. Surface finishing of Nitinol for implantable medical devices: A review // Journal of Biomedical Materials Research Part B: Applied Biomaterials. 110(12), 2763–2778 (2022). DOI: 10.1002/jbm.b.35112.
Witkowska J., Sobiecki J., Wierzchoń T. Advancements in surface modification of NiTi alloys for orthopedic implants: focus on low-temperature glow discharge plasma oxidation techniques // International Journal of Molecular Sciences. 26(3), 1132 (2025). DOI: 10.3390/ijms26031132.
Artyukhova N.V., Anikeev S.G., Shabalina A.V., et al. Effect of different modes of electron-beam processing on structure, surface properties, corrosion resistance and martensitic transformations of TiNi-based alloy // Vacuum. 245, 114994 (2026). DOI: 10.1016/j.vacuum.2025.114994.
Long M., Rack H.J. Titanium alloys in total joint replacement – a materials science perspective // Biomaterials. 19, 1621–1639 (1998). DOI: 10.1016/S0142-9612(97)00146-4.
Williams D.F. On the mechanisms of biocompatibility // Biomaterials. 29, 2941–2953 (2008). DOI: 10.1016/j.biomaterials.2008.04.023.
Shabalovskaya S.A. Surface, corrosion and biocompatibility aspects of Nitinol as an implant material // Bio-Medical Materials and Engineering. 12(1), 69–109 (2002). DOI: 10.1177/095929892002012001007.
Saylor D.M., Sivan S., Turner P., et al. Temperature dependence of nickel ion release from Nitinol medical devices // Journal of Biomedical Materials Research Part B: Applied Biomaterials. 109, 1188–1197 (2021). DOI: 10.1002/jbm.b.34781.
Wang X., Xie D., Hou M., et al. Effects of adsorption of O2 and H2O molecules on the corrosion behavior of the NiTi alloy surface: a DFT investigation // Physical Chemistry Chemical Physics. 26, 24370–24383 (2024). DOI: 10.1039/D4CP02631D.
Hanawa T. Titanium-tissue interface reaction and its control with surface treatment // Frontiers in Bioengineering and Biotechnology. 7, 170 (2019). DOI: 10.3389/fbioe.2019.00170.
Churakova A.A., Vorobiev E.V., Iskhakova E.I. Study of the corrosion resistance of Ti-50.2 at. % Ni alloy in a weakly concentrated solution of hydrochloric acid // Materials. Technologies. Design. 7(1(20)), 66–79 (2025). DOI: 10.54708/26587572_2025_712066.
Wu J., Deng Y., Guo X., Zhou S. Effect of heat treatment on the microstructure and in-situ corrosion behavior of SLM-NiTi alloys // Materials Today Communications. 39, 108636 (2024). DOI: 10.1016/j.mtcomm.2024.108636.
Mahmud A., Wu Z., Zhang J., et al. Surface oxidation of NiTi and its effects on thermal and mechanical properties // Intermetallics. 103, 52–62 (2018). DOI: 10.1016/j.intermet.2018.09.013.
Xu C.H., Ma X.Q., Shi S.Q., et al. Oxidation behavior of TiNi shape memory alloy at 450–750 °C // Materials Science and Engineering: A. 371, 45–52 (2004). DOI: 10.1016/S0921-5093(03)00287-9.
Vojtěch D., Novák P., Novák M., et al. Cyclic and isothermal oxidations of Nitinol wire at moderate temperatures // Intermetallics. 16, 424–431 (2008). DOI: 10.1016/j.intermet.2007.12.006.
Smialek J.L., Garg A., Rogers R.B., Noebe R.D. Oxide scales formed on NiTi and NiPtTi shape memory alloys // Metallurgical and Materials Transactions A. 43(7), 2325–2341 (2012). DOI: 10.1007/s11661-011-1036-x.
Tian H., Schryvers D., Liu D., et al. Stability of Ni in Nitinol oxide surfaces // Acta Biomaterialia. 7, 892–899 (2011). DOI: 10.1016/j.actbio.2010.09.009.
Firstov G.S., Vitchev R.G., Kumar H., et al. Surface oxidation of NiTi shape memory alloy // Biomaterials. 23, 4863–4871 (2002). DOI: 10.1016/S0142-9612(02)00244-2.
ASTM G102-89(2015)e1. Standard Practice for Calculation of Corrosion Rates and Related Information from Electrochemical Measurements. West Conshohocken, PA: ASTM International, 2015.
Ou S.-F., Peng B.-Y., Chen Y.-C., Tsai M.-H. Manufacturing and characterization of NiTi alloy with functional properties by selective laser melting // Metals. 8, 342 (2018). DOI: 10.3390/met8050342.
Ng C.W., Mahmud A.S., Ahmad M.N., et al. Estimation of titanium oxide layer thickness on thermally oxidized NiTi alloy based on color variations // Materialwissenschaft und Werkstofftechnik. 53(1), 47–55 (2022). DOI: 10.1002/mawe.202100084.
Diamanti M.V., Del Curto B., Pedeferri M.P. Interference colors of thin oxide layers on titanium // Color Research & Application. 33(3), 221–228 (2008). DOI: 10.1002/col.20403.
