Vol. 21 No. 1 (75) (2017): Вестник УГАТУ

Control system for electric discharge machining process

Vladimir Vladimirovich Adamovskiy, Evgeniy Vladimirovich Parfenov, Rustem Halimovich Gancev

3-10
- PDF (Русский)
Calculation on durability of driving wheels of centrifugal type fans

Irina Vadimovna Demyanushko, Andrey Borisovich Belyaev

11-16
- PDF (Русский)
Simulation of crack growth in the area of bending technology pipeline

Vladimir Sergeevich Zhernakov, Igor Nikolaevich Budilov

17-23
- PDF (Русский)
Simulation of unsteady electrochemical machining by ellipsoidal electrode tool

Vladimir Pavlovich Zhitnikov, Natalya Mihaylovna Sheryhalina, Anastasiya Olegovna Chukalova, Aleksandra Alekseevna Sokolova

24-32
- PDF (Русский)
The selection procedure of significant factors in modeling process

Lyudmila Yaroslavovna Kozak

33-37
- PDF (Русский)

Effect of inlet distorted flow on the performance of an axial compressor stage using CFD-software ANSYS CFX

Dmitriy Albertovich Ahmedzyanov, Yuriy Mavlyutovich Ahmetov, Aleksandra Borisovna Mihaylova, Aleksey Evgenevich Mihaylov, Razmik Gevorgovich Dadoyan

63-71
- PDF (Русский)
Analysis of influence of reducing axial compressor’s size

Aleksey Aleksandrovich Bobrik, Andrey Yurevich Tkachenko, Venedikt Stepanovich Kuzmichev

72-79
- PDF (Русский)
Influence of trailing edges displacement angle of longitudinal ribs on gas-dynamics characteristics of cascades of thrust reverser unit located in bypass duct of bypass turbofan engine

Vadim Lvovich Varsegov

80-90
- PDF (Русский)
The efficiency limits of the traditional gas turbine engines

Venedikt Stepanovich Kuzmichev, Andrey Yurevich Tkachenko, Evgeniy Pavlovich Filinov

91-99
- PDF (Русский)
Monitoring of thermostressed state parameters of gas turbine blades and their residual life estimation

Gennadiy Grigorevich Kulikov, Vladimir Alekseevich Trushin, Ansaf Irekovich Abdulnagimov

100-104
- PDF (Русский)
Analysis of damage of the bulkhead of the helicopter when operating

Lyaysan Ayratovna Latypova, Aleksey Viktorovich Zyryanov

105-109
- PDF (Русский)
Three layer modified mathematical modeling of heat exchange in pipes with rough walls

Igor Evgenevich Lobanov

110-117
- PDF (Русский)
About the direction of acoustic radiation of propeller power plant

Petr Aleksandrovich Moshkov

118-127
- PDF (Русский)
Determination thermophysical properties of multicomponent gas mixtures

Naum Moiseevich Cirelman, Aleksey Valerevich Komarov

128-135
- PDF (Русский)

Conceptual model of the system for supporting the adjustment of technological processes of machine tools

Aleksandr Sergeevich Davletbaev, Gennadiy Grigorevich Kulikov, Yuriy Valentinovich Starcev

142-150
- PDF (Русский)
Expert system of estimation of technical condition of aircraft engine using dynamic sets of informative signs

Sergey Vladimirovich Zhernakov, Natalya Sergeevna Ivanova

151-159
- PDF (Русский)
Control of scientific school as multivariable dynamic object

Nikolay Konstantinovich Krioni, Baryy Galeevich Ilyasov, Ilmira Baryevna Gerasimova, Anastasiya Gennadevna Karamzina

160-166
- PDF (Русский)
About the correctness of the membership functions of solution of differential equations with fuzzy initial data

Denis Vyacheslavovich Kuznecov, Vladimir Vasilevich Vodopyanov

167-172
- PDF (Русский)
Limiting quasi-stationary copying round up electrodetool

Vladimir Pavlovich Zhitnikov, Nataliya Mihaylovna Sheryhalina, Aleksandra Alekseevna Sokolova

173-179
- PDF (Русский)

Vol. 21 No. 1 (75) (2017): Вестник УГАТУ

Control system for electric discharge machining process

Calculation on durability of driving wheels of centrifugal type fans

Simulation of crack growth in the area of bending technology pipeline

Simulation of unsteady electrochemical machining by ellipsoidal electrode tool

The selection procedure of significant factors in modeling process

Effect of inlet distorted flow on the performance of an axial compressor stage using CFD-software ANSYS CFX

Analysis of influence of reducing axial compressor’s size

Influence of trailing edges displacement angle of longitudinal ribs on gas-dynamics characteristics of cascades of thrust reverser unit located in bypass duct of bypass turbofan engine

The efficiency limits of the traditional gas turbine engines

Monitoring of thermostressed state parameters of gas turbine blades and their residual life estimation

Analysis of damage of the bulkhead of the helicopter when operating

Three layer modified mathematical modeling of heat exchange in pipes with rough walls

About the direction of acoustic radiation of propeller power plant

Determination thermophysical properties of multicomponent gas mixtures

Conceptual model of the system for supporting the adjustment of technological processes of machine tools

Expert system of estimation of technical condition of aircraft engine using dynamic sets of informative signs

Control of scientific school as multivariable dynamic object

About the correctness of the membership functions of solution of differential equations with fuzzy initial data

Limiting quasi-stationary copying round up electrodetool

Information

Make a Submission

Language