Vol. 20 No. 3 (73) (2016): Вестник УГАТУ

Investigation of the method of rotary swaging under the conditions of large strains

Rashid Nailevich Asfandiyarov, Georgiy Iosifovich Raab

3-6
- PDF (Русский)
The regression analysis of the carbonic carcasses effect on the lubricant tribological characteristics

Ilya Igorevich Emaev, Nikolay Konstantinovich Krioni, Vladimir Ivanovich Semenov, Sergey Vladimirovich Chertovskih, Leva Shmulevich Shuster

7-11
- PDF (Русский)
Investigation of stress–strain state interference fit in pure shear and biaxial tension considering technological stresses

Vladimir Sergeevich Zhernakov, Tamara Nikolaevna Mardimasova, Vadim Rinatovich Akbashev, Kseniya Vladimirovna Koneva

12-18
- PDF (Русский)
Structure and properties of ultrafine-grained martensitic steel

Rinat Kadyhanovich Islamgaliev, Artur Vilevich Ganeev, Marina Aleksandrovna Nikitina, Marina Vladimirovna Karavaeva

19-24
- PDF (Русский)
The UFG structure and mechanical properties of the Mg1%Ca magnesium alloy

Olga Borisovna Kulyasova, Yana Vladimirovna Cherneykina, Rinat Kadyhanovich Islamgaliev, Ruslan Zufarovich Valiev

25-30
- PDF (Русский)
Mathematical modeling of initial deformations in surface hardened parts for the choice of a reference specimen

Vyacheslav Petrovich Sazanov, Olga Yurevna Semenova, Viktor Alekseevich Kirpichev, Vladimir Stepanovich Vakulyuk

31-37
- PDF (Русский)
Research of the complex vacuum ion-plasma treatment effect on the fatigue strength of GTE blades with the concentrator

Anatoliy Mihaylovich Smyslov, Marina Konstantinovna Smyslova, Aleksey Ivanovich Dubin

38-43
- PDF (Русский)
Properties of vacuum ion-plasma coatings, surface modification of ion-current discharge

Semen Romanovich Shehtman, Nadezhda Aleksandrovna Suhova

44-48
- PDF (Русский)
Calculation of the effective elastic characteristics of the method of asymptotic homogenization

Aleksandr Anatolevich Filippov, Viktor Pavlovich Pavlov, Sergey Nikolaevich Nikitin

49-57
- PDF (Русский)

Influence of life operating time on parameters, assembly characteristics and gas temperature at a turbine inlet of an airforce engine

Gennadiy Petrovich Grebenyuk, Ruzil Failevich Sultanov, Maksim Yurevich Shabalin, Valeriy Renatovich Rahmatullin

83-88
- PDF (Русский)
Mathematical modeling of the turbopropfan engine when tested coaxial propfan with automatic control system on stand seminatural modeling

Artem Viktorovich Ivanov, Aleksey Mihaylovich Danilihin, Viktor Vasilevich Baranov, Vitaliy Ivanovich Hilko

89-94
- PDF (Русский)

Asynchronous model of computation on shared memory

Sergey Borisovich Arykov

114-121
- PDF (Русский)
A parallel-pipeline form of application for programming of hybrid computer systems

Aleksey Igorevich Dordopulo, Ilya Izrailevich Levin, Igor Anatolevich Kalyaev, Vyacheslav Aleksandrovich Gudkov, Andrey Aleksandrovich Gulenok, Georgiy Aleksandrovich Estafev

122-128
- PDF (Русский)
Topological analysis of the structure of fuzzy cognitive model of project feasibility assessment to create of the information-control systems for complex technical objects

Anna Evgenevna Kolodenkova

129-136
- PDF (Русский)
Scalable parallel algorithm for simulation of 3D dynamics of gravitating systems using particle-in-cells methods

Nikolay Valerevich Snytnikov

137-142
- PDF (Русский)
Complex of models, explicit regularized schemes of high–order of accuracy and applications for predictive modeling of aftermath of emergency oil spill

Aleksandr Ivanovich Suhinov, Alla Valerevna Nikitina, Alena Aleksandrovna Semenyakina, Aleksandr Evgenevich Chistyakov

143-152
- PDF (Русский)
Development and application of a specialized parallel code for numerical simulation of unsteady turbulent freesurface flows

Aleksandr Iosifovich Hrabryy, Dmitriy Kirillovich Zaycev, Evgeniy Mihaylovich Smirnov

153-163
- PDF (Русский)

Vol. 20 No. 3 (73) (2016): Вестник УГАТУ

Investigation of the method of rotary swaging under the conditions of large strains

The regression analysis of the carbonic carcasses effect on the lubricant tribological characteristics

Investigation of stress–strain state interference fit in pure shear and biaxial tension considering technological stresses

Structure and properties of ultrafine-grained martensitic steel

The UFG structure and mechanical properties of the Mg1%Ca magnesium alloy

Mathematical modeling of initial deformations in surface hardened parts for the choice of a reference specimen

Research of the complex vacuum ion-plasma treatment effect on the fatigue strength of GTE blades with the concentrator

Properties of vacuum ion-plasma coatings, surface modification of ion-current discharge

Calculation of the effective elastic characteristics of the method of asymptotic homogenization

Influence of life operating time on parameters, assembly characteristics and gas temperature at a turbine inlet of an airforce engine

Mathematical modeling of the turbopropfan engine when tested coaxial propfan with automatic control system on stand seminatural modeling

Asynchronous model of computation on shared memory

A parallel-pipeline form of application for programming of hybrid computer systems

Topological analysis of the structure of fuzzy cognitive model of project feasibility assessment to create of the information-control systems for complex technical objects

Scalable parallel algorithm for simulation of 3D dynamics of gravitating systems using particle-in-cells methods

Complex of models, explicit regularized schemes of high–order of accuracy and applications for predictive modeling of aftermath of emergency oil spill

Development and application of a specialized parallel code for numerical simulation of unsteady turbulent freesurface flows

Information

Make a Submission

Language