Vol. 26 No. 2 (96) (2022): Vestnik UGATU

DETERMINATION OF THE CONDITIONS MAXIMUM MACHINABILITY OF HARD-TO-PROCESS MATERIALS DURING TURNING BASED ON VIBRATION PARAMETERS

Evgeniy Vladimirovich Artamonov, Vladimir Mikhailovich Kostiv, Dmitry Vyacheslavovich Vasilyev, Vladislav Vadimovich Voronin

4-12
- PDF (Русский)
TRIBOLOGY OF MULTILAYER-COMPOSITE SOLID LUBRICATING COATINGS ON SIALON FOR THEIR USE IN CASES OF GTE APPLICATION

Leonid Nikolaevich Lesnevski, Maxim Aleksandrovich Lyakhovetskiy , Ilya Alekseevich Nikolaev , Marina Aleksandrovna Volosova

13-23
- PDF (Русский)
INFLUENCE OF EXTERNAL FACTORS AND INTERNAL STRUCTURE ORGANIZATION ON FREE VIBRATIONS OF CM PLATES

Yury Sergeevich Pervushin, Alexey Venerovich Akhmedyanov , Pavel Vladimirovich Soloviev

24-30
- PDF (Русский)

EVALUATION AND IMPROVEMENT OF THE ACCURACY OF DETERMINING THE CHARACTERISTICS OF AN AIRCRAFT ENGINE WHEN MONITORING ITS TECHNICAL CONDITION DURING OPERATION

Vladimir Alekseevich Zagorsky , Mikhail Vladimirovich Blednykh, Danila Vladimirovich Blednykh

31-40
- PDF (Русский)
DEVELOPMENT OF A FLYING LABORATORY BASED ON A LUNG UNMANNED AERIAL VEHICLE

Yurij Vladimirovich Zinenkov, Valeryii Ivanovich Kondratyuk , Stanislav Petrovich Aksenov , Igor Mihajlovich Golev, Aleksej Viktorovich Kovalev

41-52
- PDF (Русский)
CRITERION TO EFFECTIVE OF GAS TURBINE OF COMPLEX CYCLE WITH INTERMEDIATE HEATING AND FREE TURBINE

Vadim Aleksandrovich Ivanov

53-59
- PDF (Русский)
ANALYS OF PD-14 AIRCRAFT ENGINE RESISTANCE TO THE VOLCANIC ASH IMPACT

Alexander Alexandrovich Inozemtsev, Diana Dmitrievna Popova , Taras Viktorovich Abramchuk, Olga Alekseevna Girina , Lev Samoylovich Rysin , Sergey Vladimirovich Kuptsov , Aleksey Nikolaevich Sazhenkov , Stanislav Igorevich Sendyurev , Alexander Vladimirovich Chelombitko , Marat Dimovich Gallyamov, Andrey Vyacheslavovich Dvinskikh

60-70
- PDF (Русский)
BENDING VIBRATIONS OF FLEXIBLE METAL HOSES AND EVALUATION OF THEIR OPERABILITY

Valery Kayumovich Itbaev, Vener Rifkatovich Mukhamadeev

71-81
- PDF (Русский)
APPROBATION OF THE METHOD FOR ESTIMATION OF CARBON MONOXIDE EMISSIONS FROM GAS TURBINE COMBUSTORS USING A CHEMICAL REACTOR MODEL WITH TRACKING “LEAN” FUEL-AIR MIXTURE JETS

Artur Ramilevich Kutlumukhamedov , Dmitriy Vladimirovich Skiba, Gennadij Petrovich Grebenyuk, Fedor Gayfullovich Bakirov

82-92
- PDF (Русский)
DEVELOPMENT OF AN EXPERIMENTAL STAND FOR STUDYING THE CHARACTERISTICS OF AN AXIAL TURBINE STAGE

Maksim Mihajlovich Fedotov, Yurij Vladimirovich Zinenkov , Aleksandr Valentinovich Kretinin , Alexey Vladimirovich Popov, Vladimir Nikolaevich Nechaev

93-104
- PDF (Русский)
THE FEATURES OF TURBINE NOZZLE THROAT PARAMETERS ESTIMATION AT GAS TURBINE ENGINE CALCULATION

Yury Aleksandrovich Ezrokhi, Anastasiya Al´bertovna Gusmanova

105-114
- PDF (Русский)
POWER CHARACTERISTICS FLEXIBLE METAL SLEEVES WHEN BENDING

Valery Kayumovich Itbaev, Vener Rifkatovich Mukhamadeev

115-125
- PDF (Русский)

MODEL OF DECISION MAKING ОN CONTROL OF CASSETTE CONVEYOR MOVEMENT IN MECHANICAL PROCESSING PRODUCTION

Irada Samed Zeynalabdiyeva

126-133
- PDF (Русский)
DESIGN OF AN INTELLECTUAL SYSTEM FOR MANAGING THE EDUCATIONAL AND INNOVATIVE ACTIVITIES OF THE UNIVERSITY

Sergey Vladimirovich Novikov

134-145
- PDF (Русский)

DETERMINATION OF THE CONDITIONS MAXIMUM MACHINABILITY OF HARD-TO-PROCESS MATERIALS DURING TURNING BASED ON VIBRATION PARAMETERS

TRIBOLOGY OF MULTILAYER-COMPOSITE SOLID LUBRICATING COATINGS ON SIALON FOR THEIR USE IN CASES OF GTE APPLICATION

INFLUENCE OF EXTERNAL FACTORS AND INTERNAL STRUCTURE ORGANIZATION ON FREE VIBRATIONS OF CM PLATES

EVALUATION AND IMPROVEMENT OF THE ACCURACY OF DETERMINING THE CHARACTERISTICS OF AN AIRCRAFT ENGINE WHEN MONITORING ITS TECHNICAL CONDITION DURING OPERATION

DEVELOPMENT OF A FLYING LABORATORY BASED ON A LUNG UNMANNED AERIAL VEHICLE

CRITERION TO EFFECTIVE OF GAS TURBINE OF COMPLEX CYCLE WITH INTERMEDIATE HEATING AND FREE TURBINE

ANALYS OF PD-14 AIRCRAFT ENGINE RESISTANCE TO THE VOLCANIC ASH IMPACT

BENDING VIBRATIONS OF FLEXIBLE METAL HOSES AND EVALUATION OF THEIR OPERABILITY

APPROBATION OF THE METHOD FOR ESTIMATION OF CARBON MONOXIDE EMISSIONS FROM GAS TURBINE COMBUSTORS USING A CHEMICAL REACTOR MODEL WITH TRACKING “LEAN” FUEL-AIR MIXTURE JETS

DEVELOPMENT OF AN EXPERIMENTAL STAND FOR STUDYING THE CHARACTERISTICS OF AN AXIAL TURBINE STAGE

THE FEATURES OF TURBINE NOZZLE THROAT PARAMETERS ESTIMATION AT GAS TURBINE ENGINE CALCULATION

POWER CHARACTERISTICS FLEXIBLE METAL SLEEVES WHEN BENDING

MODEL OF DECISION MAKING ОN CONTROL OF CASSETTE CONVEYOR MOVEMENT IN MECHANICAL PROCESSING PRODUCTION

DESIGN OF AN INTELLECTUAL SYSTEM FOR MANAGING THE EDUCATIONAL AND INNOVATIVE ACTIVITIES OF THE UNIVERSITY

Information

Make a Submission

Language