Vol. 19 No. 4 (70) (2015): Вестник УГАТУ

Published: 2018-07-11

Prediction of chemical education compounds with protective properties on the tool when cutting metals

Ayrat Minetdinovich Aydarbekov, Mars Sharifullovich Migranov, Vener Rifkatovich Muhamadeev

3-7
- PDF (Русский)
The analysis of mixing parameters of stratified flows in the vortex gas pressure regulator

Yuriy Mavlyutovich Ahmetov, Ernest Irekovich Zangirov, Anton Vyacheslavovich Svistunov, Elena Maratovna Yaminova, Kseniya Petrovna Shutihina

8-15
- PDF (Русский)
Mathematical model for prediction lifetime of cutting tool in turning with advancing plastic deformation

Aleksandr Aleksandrovich Bondarev, Yaroslav Nikolaevich Oteniy, Yuliy Lvovich Chigirinskiy, Dmitriy Vadimovich Kraynev, Aleksandr Ronaldovich Ingemansson

16-20
- PDF (Русский)
Quality improvement of spark plugs manufacture technological process and their operating properties on various stages of the life cycle

Aleksey Germanovich Lyutov, Aleksandr Nikolaevich Ilin, Evgeniya Aleksandrovna Filonina

21-27
- PDF (Русский)
Research of influence physical and mechanical properties of rocks on working processes of the electrohydraulic boring perforating gun

Arsen Vladimirovich Mesropyan, Mariya Olegovna Mityagina

28-33
- PDF (Русский)
Autonomous force sensor for dynamometery system of sucker rod pumping unit

Aleksandr Olegovich Timofeev, Vasih Hamatovich Yasoveev

34-39
- PDF (Русский)
Determining velocity and tensile strength in a moving rod using natural frequencies of flexural vibrations

Akim Gayfullinovich Hakimov

40-44
- PDF (Русский)
Modeling of plating process in view of geometrical configurations of electrodes

Aleksey Germanovich Lyutov, Aliya Rifovna Ishkulova

45-48
- PDF (Русский)

New technologies in visualization of geo?hydrodynamic models

Marsel Rafaelevich Badretdinov, Timur Rafaelevich Badretdinov, Oleg Sergeevich Borschuk

84-94
- PDF (Русский)
Intelligent intrusion detection system in local wireless networks

Vladimir Ivanovich Vasilev, Ilya Viktorovich Sharabyrov

95-105
- PDF (Русский)
Linear correlations estimation of technical objects parameters without correlation table of empirical data

Vladimir Efimovich Gvozdev, Aliya Salavatovna Subhangulova, Oksana Yakovlevna Bezhaeva

106-117
- PDF (Русский)
The experience of using graphics processors for solving sparse systems of linear algebraic equations in the scope of hydrodynamic modeling of oil and gas fields

Ratmir Rasilevich Gubaydullin, Nikita Vyacheslavovich Repin, Artur Vladimirovich Yuldashev

118-123
- PDF (Русский)
Heterogeneous document sources in situationallyoriented databases

Artem Sergeevich Gusarenko, Valeriy Viktorovich Mironov

124-131
- PDF (Русский)
The application of logical controller for aircraft gas turbine engine control

Baryy Galeevich Ilyasov, Guzel Ashatovna Saitova, Iskander Ildarovich Sabitov

132-137
- PDF (Русский)
On the question of hardware implementation module streaming encryption for comprehensive information security system

Taras Evgenevich Mihaylyuk, Sergey Vladimirovich Zhernakov

138-148
- PDF (Русский)
Study of structural properties of Cholesky decomposition: from well?known facts to new conclusions

Aleksey Vyacheslavovich Frolov, Vadim Vladimirovich Voevodin, Igor Nikolaevich Konshin, Aleksey Mihaylovich Teplov

149-162
- PDF (Русский)
Assess whether to use low resolution images for predicting flood situation in the Republic of Bashkortostan by GIS-technologies

Olga Igorevna Hristodulo, Andrey Faragatovich Atnabaev, Igor Klyayn

163-171
- PDF (Русский)

Vol. 19 No. 4 (70) (2015): Вестник УГАТУ

Prediction of chemical education compounds with protective properties on the tool when cutting metals

The analysis of mixing parameters of stratified flows in the vortex gas pressure regulator

Mathematical model for prediction lifetime of cutting tool in turning with advancing plastic deformation

Quality improvement of spark plugs manufacture technological process and their operating properties on various stages of the life cycle

Research of influence physical and mechanical properties of rocks on working processes of the electrohydraulic boring perforating gun

Autonomous force sensor for dynamometery system of sucker rod pumping unit

Determining velocity and tensile strength in a moving rod using natural frequencies of flexural vibrations

Modeling of plating process in view of geometrical configurations of electrodes

New technologies in visualization of geo?hydrodynamic models

Intelligent intrusion detection system in local wireless networks

Linear correlations estimation of technical objects parameters without correlation table of empirical data

The experience of using graphics processors for solving sparse systems of linear algebraic equations in the scope of hydrodynamic modeling of oil and gas fields

Heterogeneous document sources in situationallyoriented databases

The application of logical controller for aircraft gas turbine engine control

On the question of hardware implementation module streaming encryption for comprehensive information security system

Study of structural properties of Cholesky decomposition: from well?known facts to new conclusions

Assess whether to use low resolution images for predicting flood situation in the Republic of Bashkortostan by GIS-technologies

Information

Make a Submission

Language