Vol. 19 No. 3 (69) (2015): Вестник УГАТУ

Published: 2018-07-11

Pilot studies of strength reliability of perspective gasturbine engines

Yuriy Aleksandrovich Nozhnickiy, Boris Aleksandrovich Baluev, Yuliya Alekseevna Fedina

3-14
- PDF (Русский)
Development of experimental methods of determination of strength and thermophysical properties of separate real thickness TBC layers at working temperatures

Nikolay Grigorevich Bychkov, Yuriy Aleksandrovich Nozhnickiy, Aleksey Viktorovich Pershin, Artem Shamilevich Hamidullin

15-20
- PDF (Русский)
Influence of operation conditions at the residual stress relaxation in turbine root slots of HPT, made of monocrystal nickel super alloys

Tatyana Pavlovna Zaharova, Mihail Aleksandrovich Rozanov, Svetlana Vladimirovna Teplova

21-27
- PDF (Русский)
Investigation of the shroud configuration influence of advanced turbine blades engines on strength characteristics

Boris Evgenevich Vasilev, Lyubov Aleksandrovna Magerramova

28-32
- PDF (Русский)
The calculated investigation of influence of autofrettage on the cycle durability of HPT disc

Kamaliddin Dzhamoldinovich Karimbaev, Aleksandr Roaldovich Lepeshkin, Anton Vladelinovich Salnikov

33-36
- PDF (Русский)
An optimization of frequency spectrum of turbine wheels with cooled blades

Anton Vladelinovich Salnikov, Galina Vsevolodovna Melnikova

37-43
- PDF (Русский)
Calculation and experimental investigation of the effectiveness of helicopter engine protection against foreign objects damage

Boris Fedorovich Shorr, Aleksey Vladimirovich Goryachev, Viktor Sergeevich Macarenko, Vadim Gennadievich Zhulin, Vladimir Valerevich Savenkov

44-49
- PDF (Русский)
Matematical modeling of isothermal punching and superplasticity forming of hollow fan blade

Yuriy Moiseevich Temis, Artem Pavlovich Hudyakov

50-60
- PDF (Русский)
High bypass ratio turbojet engine fan blades aerodamping coefficient computation

Vladimir Evgenevich Makarov, Sergey Pavlovich Andreev, Viktor Aleksandrovich Shorstov, Tatyana Vasilevna Buyukli

61-64
- PDF (Русский)
Radial clearance changes features and burned coatings depreciation in the axial compressor at blades flutter

Anatoliy Alekseevich Horikov

65-69
- PDF (Русский)
Determination of radial displacements of cases and aviation multi?shaft counter?rotors engines during the aircraft evolution

Boris Solomonovich Blinnik, Andrey Dmitrievich Bortnikov, Evgeniy Maksimovich Gugo, Vladimir Viktorovich Starodubcev

70-76
- PDF (Русский)
Solving the task guide vane by production of its parts from composite materials

Arsen Maratovich Ahmetov, Sergey Nikolaevich Nikitin, Viktor Leonidovich Yurev, Ildar Gayanovich Karimov

77-80
- PDF (Русский)
Electro?hydraulic control system extinguishing solid engine

Aleksandr Borisovich Bachurin, Evgeniy Sergeevich Litvinov, Evgeniy Vladimirovich Strelnikov, Vladimir Aleksandrovich Celischev

81-91
- PDF (Русский)
The analysis of possibility of flame control in the afterburner at use constant volume combustion chamber

Vasiliy Ivanovich Bogdanov, Aleksey Konstantinovich Dormidontov

92-96
- PDF (Русский)
Centrifugal compressor wheel state of stress made of titanium alloys

Vladimir Sergeevich Zhernakov, Igor Nikolaevich Budilov, Anatoliy Nikolaevich Ermolenko

97-102
- PDF (Русский)
Streamline tracking method basics

Igor Aleksandrovich Krivosheev, Kirill Evgenevich Rozhkov, Nikolay Borisovich Simonov

103-110
- PDF (Русский)
Thermodynamic foundations of isothermal expansion and methods of turbine GTE calculation with isothermal expansion

Mariya Alekseevna Muraeva, Ivan Mihaylovich Goryunov, Valeriy Fedorovich Haritonov

111-118
- PDF (Русский)

The experimental study of low?cycle fatigue of single crystals of heat?resistant Ni?base alloy VGM5 at high temperatures

Evgeniy Rostislavovich Golubovskiy, Mihail Evgenevich Volkov, Nikolay Mihaylovich Emmausskiy, Sergey Aleksandrovich Shibaev

119-125
- PDF (Русский)
About criteria of loss of stability of the squeezed cores outside elasticity at rigid loading

Kamaliddin Dzhamoldinovich Karimbaev, Denis Sergeevich Palchikov

126-131
- PDF (Русский)
Convective heat transfer in channels with variable crosssection

Igor Spartakovich Eliseev, Naum Moiseevich Cirelman

132-138
- PDF (Русский)
Layered composite materials structure imbalance influence on construction elements technological (residual) stresses

Vladimir Sergeevich Zhernakov, Yuriy Sergeevich Pervushin, Pavel Vladimirovich Solovev

139-149
- PDF (Русский)
Optimal control of electrolyticplasma polishing technological process using plant monitoring by impedance spectra

Veta Robertovna Mukaeva, Evgeniy Vladimirovich Parfenov, Mihail Viktorovich Gorbatkov, Rimma Rahimzyanovna Nevyanceva

150-157
- PDF (Русский)

Two?level parallel strategy for multifrontal sparse Cholesky factorization

Sergey Aleksandrovich Lebedev, Iosif Borisovich Meerov, Evgeniy Aleksandrovich Kozinov, Dmitiriy Rinatovich Ahmedzhanov, Anna Yurevna Pirova, Aleksandr Vladimirovich Sysoev

178-189
- PDF (Русский)
Abstracting of a Cutting Plan to a Plane Graph for Effective Solution of Details Cut?off Problem

Tatyana Anatolevna Makarovskih, Egor Aleksandrovich Savickiy

190-196
- PDF (Русский)

Vol. 19 No. 3 (69) (2015): Вестник УГАТУ

Pilot studies of strength reliability of perspective gasturbine engines

Development of experimental methods of determination of strength and thermophysical properties of separate real thickness TBC layers at working temperatures

Influence of operation conditions at the residual stress relaxation in turbine root slots of HPT, made of monocrystal nickel super alloys

Investigation of the shroud configuration influence of advanced turbine blades engines on strength characteristics

The calculated investigation of influence of autofrettage on the cycle durability of HPT disc

An optimization of frequency spectrum of turbine wheels with cooled blades

Calculation and experimental investigation of the effectiveness of helicopter engine protection against foreign objects damage

Matematical modeling of isothermal punching and superplasticity forming of hollow fan blade

High bypass ratio turbojet engine fan blades aerodamping coefficient computation

Radial clearance changes features and burned coatings depreciation in the axial compressor at blades flutter

Determination of radial displacements of cases and aviation multi?shaft counter?rotors engines during the aircraft evolution

Solving the task guide vane by production of its parts from composite materials

Electro?hydraulic control system extinguishing solid engine

The analysis of possibility of flame control in the afterburner at use constant volume combustion chamber

Centrifugal compressor wheel state of stress made of titanium alloys

Streamline tracking method basics

Thermodynamic foundations of isothermal expansion and methods of turbine GTE calculation with isothermal expansion

The experimental study of low?cycle fatigue of single crystals of heat?resistant Ni?base alloy VGM5 at high temperatures

About criteria of loss of stability of the squeezed cores outside elasticity at rigid loading

Convective heat transfer in channels with variable crosssection

Layered composite materials structure imbalance influence on construction elements technological (residual) stresses

Optimal control of electrolyticplasma polishing technological process using plant monitoring by impedance spectra

Two?level parallel strategy for multifrontal sparse Cholesky factorization

Abstracting of a Cutting Plan to a Plane Graph for Effective Solution of Details Cut?off Problem

Information

Make a Submission

Language