Vol. 12 No. 4 (33) (2009): Вестник УГАТУ

Published: 2018-09-07

The contribution of the honoured workerand of science and technics of RSFSR, of doctor of technical sciences, of professor A.D. Makarov in science development about metal cutting

Murat Bakeevich Guzairov

3-4
- PDF (Русский)

Thermodynamic description of synchronism of mechanical and thermal processes in unsteady metal cutting

Vladimir Valentinovich Postnov

5-9
- PDF (Русский)
Substantiation of expediency of processing at the optimal cutting temperature established by A. D. Makarov

Vyacheslav Feoktistovich Bezyazychnyy

10-13
- PDF (Русский)
Automation of cutting operation on basis of state about optimal cutting temperature cutting

Vyacheslav Cydenovich Zoriktuev

14-19
- PDF (Русский)
Features of thermodynamic processes on contact surface of the cutting tool

Mars Sharifullovich Migranov, Leva Shmulevich Shuster

20-23
- PDF (Русский)
Investigation of solid turned

Mihail Pavlovich Kozochkin, Fan Sagirovich Sabirov, Andrey Nikolaevich Popikov

24-29
- PDF (Русский)
Feed influence on thermodynamic criteria of unsteady cutting difficult-to-cut materials

Vladimir Ivanovich Deryabin, Vladimir Valentinovich Postnov, Natalya Nikolaevna Suhanova

30-35
- PDF (Русский)
Operation of optimal cutting speed value in broaching details of gasturbine engine by NC machine tool

Vladimir Fedorovich Makarov, Vitaliy Rafailovich Tuktamyshev

36-40
- PDF (Русский)
Increasing productivity and quality of airfoil blades end-milling by impact axially stretch force

Dmitriy Viktorovich Zinovev, Lev Borisovich Uvarov

41-46
- PDF (Русский)
The research of workability of constructional materials by fast-cuting tools with the modified work surfaces

Vladimir Mihaylovich Kishurov, Vladimir Nikolaevich Ippolitov, Maksim Vladimirovich Kishurov, Mariya Yurevna Nekrasova

47-50
- PDF (Русский)
Study of influence wear-resistant coatings tools on various parameters of cutting at turning

Roman Nikolaevich Fomenko

51-55
- PDF (Русский)
Optimization of grinding depth in handling the details of CCD

Dmitriy Ivanovich Volkov, Nadezhda Vladimirovna Poluglazkova

56-60
- PDF (Русский)
Modeling of cutting operation in grinding subject to coupling elastic and thermal systems

Sergey Petrovich Nikitin

61-65
- PDF (Русский)
Features of formation of the functional properties articles of ceramic materials by lapping

Veniamin Pavlovich Baharev

66-70
- PDF (Русский)
Technique of adjustment of optimum tightness of burnisher with elastic damper for finishing processing of details on the turnery-milling center

Viktor Pavlovich Kuznecov

71-75
- PDF (Русский)
Methods of obtaining high quality of metalworking NC machines

Yoshimi Ota

76-80
- PDF (Русский)
Designing of mechatronic machine tool for implementation of controlled technological processes

Rinat Gabdulhakovich Kudoyarov, Evgeniy Markovich Durko, Viktor Ksilevich Zalcberg, Alla Vladislavovna Yusupova, Rashit Ramilovich Basharov

81-90
- PDF (Русский)
Estimate of dynamic state of the grinding machine on autocorrelation functions of vibrating acoustic oscillations for optimization of regimes of machining

Aleksandr Anatolevich Ignatev, Vera Alekseevna Karakozova, Stanislav Aleksandrovich Ignatev

91-95
- PDF (Русский)
Solution of tool path problem for equipment with parallel actuators of movable operating element

Vladimir Alekseevich Smirnov, Lina Nikolaevna Petrova

96-101
- PDF (Русский)
High-temperature lubricant solid films in sliding bearing

Nikolay Konstantinovich Krioni

102-105
- PDF (Русский)
Engineering of surface of machine components

Viktor Sergeevich Muhin, Anatoliy Mihaylovich Smyslov

106-112
- PDF (Русский)
Engineering of the flat-topped regular microrelief of the surface at multi-purpose processing of details

Viktor Pavlovich Kuznecov, Vladimir Georgievich Gorgoc, Olga Venediktovna Dmitrieva

113-115
- PDF (Русский)
Polyfunctional capabilities of ultra-jet technology of processing materials and liquids

Aleksandr Aleksandrovich Barzov, Andrey Leonidovich Galinovskiy

116-120
- PDF (Русский)
Prospects of applications of ultrajet diagnosis and quality control of items

Aleksandr Aleksandrovich Barzov, Andrey Leonidovich Galinovskiy, Igor Evgenevich Kuznecov

121-126
- PDF (Русский)
Investigation of influence of technological parameters of process diamond honing on wear resistance of working pairs borehole sucker-rod pump

Viktor Konstantinovich Perevoznikov, Aleksandr Vladimirovich Ivanov, Anton Andreevich Dolinin

127-131
- PDF (Русский)
Technological assurance of machine components surface layer optimal quality parameters

Aleksandr Nikolaevich Sutyagin

132-136
- PDF (Русский)

Vol. 12 No. 4 (33) (2009): Вестник УГАТУ

The contribution of the honoured workerand of science and technics of RSFSR, of doctor of technical sciences, of professor A.D. Makarov in science development about metal cutting

Thermodynamic description of synchronism of mechanical and thermal processes in unsteady metal cutting

Substantiation of expediency of processing at the optimal cutting temperature established by A. D. Makarov

Automation of cutting operation on basis of state about optimal cutting temperature cutting

Features of thermodynamic processes on contact surface of the cutting tool

Investigation of solid turned

Feed influence on thermodynamic criteria of unsteady cutting difficult-to-cut materials

Operation of optimal cutting speed value in broaching details of gasturbine engine by NC machine tool

Increasing productivity and quality of airfoil blades end-milling by impact axially stretch force

The research of workability of constructional materials by fast-cuting tools with the modified work surfaces

Study of influence wear-resistant coatings tools on various parameters of cutting at turning

Optimization of grinding depth in handling the details of CCD

Modeling of cutting operation in grinding subject to coupling elastic and thermal systems

Features of formation of the functional properties articles of ceramic materials by lapping

Technique of adjustment of optimum tightness of burnisher with elastic damper for finishing processing of details on the turnery-milling center

Methods of obtaining high quality of metalworking NC machines

Designing of mechatronic machine tool for implementation of controlled technological processes

Estimate of dynamic state of the grinding machine on autocorrelation functions of vibrating acoustic oscillations for optimization of regimes of machining

Solution of tool path problem for equipment with parallel actuators of movable operating element

High-temperature lubricant solid films in sliding bearing

Engineering of surface of machine components

Engineering of the flat-topped regular microrelief of the surface at multi-purpose processing of details

Polyfunctional capabilities of ultra-jet technology of processing materials and liquids

Prospects of applications of ultrajet diagnosis and quality control of items

Investigation of influence of technological parameters of process diamond honing on wear resistance of working pairs borehole sucker-rod pump

Technological assurance of machine components surface layer optimal quality parameters

Information

Make a Submission

Language