Vol. 17 No. 3 (56) (2013): Вестник УГАТУ

Published: -1-30-11

Simulation model identification methods for gas turbine engines, engine units and other elements

Igor Aleksandrovich Krivosheev, Olga Nikolaevna Ivanova

3-10
- PDF (Русский)
Use average integral values of parametres at mutual identification of models of gas streams of various dimension

Igor Aleksandrovich Krivosheev, Kirill Evgenevich Rozhkov, Kseniya Olegovna Vetryakusha

11-17
- PDF (Русский)
Refinement and expansion of area of use methods of calculation of characteristics of lattices of profiles

Igor Aleksandrovich Krivosheev, Kirill Evgenevich Rozhkov, Nikolay Borisovich Simonov, Danil Yahyaevich Rahmankulov

18-25
- PDF (Русский)
Automatic system for controlling the pressure in the SRM combustion chamber

Aleksandr Borisovich Bachurin, Evgeniy Sergeevich Litvinov, Evgeniy Vladimirovich Strelnikov, Vladimir Aleksandrovich Celischev

26-33
- PDF (Русский)
Modeling of heat and mass transfer processes when hydroclearing rocket engines of firm fuel

Naum Moiseevich Cirelman, Renat Rafailovich Mustafin

34-40
- PDF (Русский)
Complex protection of the gas turbine engine, which is exploited in the dusty atmosphere and the marine environment

Galey Gumerovich Enikeev

41-48
- PDF (Русский)
Combustion chamber pressure effect on subsystem of liquid drain from solid propellant grain channels

Aleksandr Borisovich Bachurin, Evgeniy Sergeevich Litvinov, Evgeniy Vladimirovich Strelnikov

49-54
- PDF (Русский)
Selection of the optimal value of the volume modes and duration of accelerated testing aircraft gas turbine engines in the multivariant applications

Anas Saidovich Gishvarov, Aleksey Andreevich Ryzhov, Marsel Nikolaevich Davydov, Georgiy Konstantinovich Ageev

55-61
- PDF (Русский)
Explanation of the quick test the reliability and resource gas turbine engines of multivariant application

Anas Saidovich Gishvarov, Aleksey Andreevich Ryzhov, Aynur Gafurovich Algushaev, Anvariya Raisovna Fatyhova

62-68
- PDF (Русский)
Development of methods and tools for automated conceptual design of aircraft gas turbine engines and power plants

Aleksandra Borisovna Mihaylova, Dmitriy Albertovich Ahmedzyanov, Aleksey Evgenevich Mihaylov, Ruslan Radikovich Nigmatullin

69-77
- PDF (Русский)
Functional design features of gas turbine engines for unmanned aerial vehicles

Yuriy Mavlyutovich Ahmetov, Dmitriy Albertovich Ahmedzyanov, Aleksandra Borisovna Mihaylova, Aleksey Evgenevich Mihaylov

78-86
- PDF (Русский)

The effect of phase separation of gas-liqud flow in the vortex tube chamber

Yuriy Mavlyutovich Ahmetov, Anton Vladimirovich Celischev

87-94
- PDF (Русский)
Vortical heatgenerators power fluid heating processes identification

Ernest Irekovich Zangirov, Radik Rifkatovich Kalimullin, Anton Vyacheslavovich Svistunov, Rustem Fanilevich Hakimov

95-102
- PDF (Русский)
Identification of the temperature characteristics of quasi-isothermal vortex gas pressure regulator

Ernest Irekovich Zangirov, Mansur Vazirovich Muhametov, Anton Vyacheslavovich Svistunov, Aleksandra Aleksandrovna Chindina

103-108
- PDF (Русский)
The investigation of the efficiency of counter flow vortex tube working as gas-liquid separator

Vladimir Sergeevich Zhernakov, Anton Vladimirovich Celischev

109-116
- PDF (Русский)
Justification of the choice of rational parameters the car when developing the specification //

Hakimzyan Amirovich Fashiev

117-122
- PDF (Русский)
Research and enhancement of computational models of cavitational mass transfer

Sergey Yurevich Konstantinov, Dmitriy Vladimirovich Celischev

123-129
- PDF (Русский)
To numerical simulation of the waterjet propulsion systems

Arsen Yasharovich Abdulin, Arsen Vladimirovich Mesropyan

130-137
- PDF (Русский)
The methodology of identification parameters and characteristics of the electrohydraulic boring perforating guns

Shamil Rashitovich Gallyamov, Arsen Vladimirovich Mesropyan, Mariya Olegovna Mityagina

138-146
- PDF (Русский)
Mathematical modeling of operatingmodesof high-speed electric submersible pumpstage

Andrey Irikovich Farhutdinov, Galey Gumerovich Enikeev, Aleksey Aleksandrovich Solovev

147-152
- PDF (Русский)
Computational fluid flow modeling in filter

Artur Albertovich Garipov, Sergey Yurevich Konstantinov, Dmitriy Evgenevich Tuk, Dmitriy Vladimirovich Celischev

153-158
- PDF (Русский)
Principles modelling of hydromechanical devices of automatic equipment

Pavel Valerevich Petrov

159-165
- PDF (Русский)
Computing experiment automation by means of program complex HMAR

Anna Aleksandrovna Koeva, Pavel Valerevich Petrov, Vladimir Aleksandrovich Celischev

166-173
- PDF (Русский)
Influence of operational factors on characteristics of a wireline formation tester

Shamil Rashitovich Gallyamov

174-181
- PDF (Русский)
Mathematical modeling of electropneumatic automatic control system of boom

Stanislav Georgievich Bazhaykin, Regina Fatyhovna Ismagilova, Dina Fatyhovna Ismagilova

182-188
- PDF (Русский)
Researchof shpp hydro machines: centrifugalpumpandhydrodynamic torque converter

Aleksandr Konstantinovich Lyamasov, Bagrat Merabovich Orahelashvili

189-193
- PDF (Русский)
Electro-pneumatic servo drive in suspension of mobile robotic system adaptive system

Rustem Anvarovich Munasypov, Oleg Vladimirovich Celischev

194-200
- PDF (Русский)
Сalculation of kinematic parameters of the differential mechanism of the automatic transmission

Hakimzyan Amirovich Fashiev, Vladimir Vladimirovich Voloshko, Ildar Ilgizarovich Salahov

201-208
- PDF (Русский)
Investigation of the possibility of wave additional сharging of the 4-stroke engine by air through an inlet valve by exhaust compression wave

Sergey Nikolaevich Atanov

209-216
- PDF (Русский)
Influence of modes microarc oxidation on properties of the formed surface

Natalya Yurevna Dudareva

217-222
- PDF (Русский)
Computational and experimental research of internal combustion engine with spark ignition and quality power level control

Oleg Petrovich Dombrovskiy, Rustemhan Fagitovich Zinnatullin, Ekaterina Gennadevna Strugova

223-230
- PDF (Русский)
Wear process mathematical modelling of sleeve assembly details of ice

Sergey Andreevich Zagayko

231-238
- PDF (Русский)
Optimal design of four-stroke piston engine tract

Andrey Aleksandrovich Chernousov

239-245
- PDF (Русский)
Study of friction force in the rodless pneumatic actuators

Aleksandr Mihaylovich Gribkov, Denis Viktorovich Shilin

246-252
- PDF (Русский)
Peculiarities of stress-strain state of GTE compressor blade made of unbalanced composites

Yuriy Sergeevich Pervushin, Pavel Vladimirovich Solovev

253-259
- PDF (Русский)
Distribution of residual stresses in cell structures with the stress concentrator of nanomaterial

Vladimir Sergeevich Zhernakov, Tamara Nikolaevna Mardimasova, Marat Rashitovich Arslanov

260-265
- PDF (Русский)

Vol. 17 No. 3 (56) (2013): Вестник УГАТУ

Simulation model identification methods for gas turbine engines, engine units and other elements

Use average integral values of parametres at mutual identification of models of gas streams of various dimension

Refinement and expansion of area of use methods of calculation of characteristics of lattices of profiles

Automatic system for controlling the pressure in the SRM combustion chamber

Modeling of heat and mass transfer processes when hydroclearing rocket engines of firm fuel

Complex protection of the gas turbine engine, which is exploited in the dusty atmosphere and the marine environment

Combustion chamber pressure effect on subsystem of liquid drain from solid propellant grain channels

Selection of the optimal value of the volume modes and duration of accelerated testing aircraft gas turbine engines in the multivariant applications

Explanation of the quick test the reliability and resource gas turbine engines of multivariant application

Development of methods and tools for automated conceptual design of aircraft gas turbine engines and power plants

Functional design features of gas turbine engines for unmanned aerial vehicles

The effect of phase separation of gas-liqud flow in the vortex tube chamber

Vortical heatgenerators power fluid heating processes identification

Identification of the temperature characteristics of quasi-isothermal vortex gas pressure regulator

The investigation of the efficiency of counter flow vortex tube working as gas-liquid separator

Justification of the choice of rational parameters the car when developing the specification //

Research and enhancement of computational models of cavitational mass transfer

To numerical simulation of the waterjet propulsion systems

The methodology of identification parameters and characteristics of the electrohydraulic boring perforating guns

Mathematical modeling of operatingmodesof high-speed electric submersible pumpstage

Computational fluid flow modeling in filter

Principles modelling of hydromechanical devices of automatic equipment

Computing experiment automation by means of program complex HMAR

Influence of operational factors on characteristics of a wireline formation tester

Mathematical modeling of electropneumatic automatic control system of boom

Researchof shpp hydro machines: centrifugalpumpandhydrodynamic torque converter

Electro-pneumatic servo drive in suspension of mobile robotic system adaptive system

Сalculation of kinematic parameters of the differential mechanism of the automatic transmission

Investigation of the possibility of wave additional сharging of the 4-stroke engine by air through an inlet valve by exhaust compression wave

Influence of modes microarc oxidation on properties of the formed surface

Computational and experimental research of internal combustion engine with spark ignition and quality power level control

Wear process mathematical modelling of sleeve assembly details of ice

Optimal design of four-stroke piston engine tract

Study of friction force in the rodless pneumatic actuators

Peculiarities of stress-strain state of GTE compressor blade made of unbalanced composites

Distribution of residual stresses in cell structures with the stress concentrator of nanomaterial

Information

Make a Submission

Language