Vol. 19 No. 2 (68) (2015): Вестник УГАТУ

Computer modeling of local ion nitriding process with effect of hollow cathode using example of gear detail

Vladimir Vasilevich Budilov, Kamil Nurullaevich Ramazanov, Yuldash Gamirovich Husainov, Ilya Vladimirovich Zolotov

3-8
- PDF (Русский)
Multivariate model selection method for production of casting of aluminum alloys

Aleksandr Sergeevich Goryuhin, Ekaterina Sergeevna Gaynceva, Irina Irikovna Shayhutdinova

9-13
- PDF (Русский)
Modeling technology stresses in connection "plate-ring"

Vladimir Sergeevich Zhernakov, Tamara Nikolaevna Mardimasova, Vadim Rinatovich Akbashev

14-19
- PDF (Русский)
Purpose of the modes turning details of gas-turbine engines on temperature in the cutting zone

Aleksey Germanovich Lyutov, Georgiy Nikolaevich Kourov, Nadezhda Georgievna Reka

20-25
- PDF (Русский)
Research of of the possibility to control the shape of the machined hole at honing

Vladimir Alekseevich Ogorodov

26-34
- PDF (Русский)
The definition of initial deformations in the cylindrical parts surface layer by Finite Elements Modeling method using PATRAN/NASTRAN program complex

Vyacheslav Petrovich Sazanov, Viktor Alekseevich Kirpichev, Vladimir Stepanovich Vakulyuk, Valentin Fedorovich Pavlov

35-40
- PDF (Русский)
Creep and long?term strength of micro?GTU turbine disk

Aleksandr Olegovich Chernyavskiy

41-45
- PDF (Русский)

Methodology of comprehensive plan optimization experiment in technical systems

Anas Saidovich Gishvarov, Georgiy Konstantinovich Ageev

46-55
- PDF (Русский)
Prognosis of primary characteristics of two spool mixed flow turbofan for perspective aviation complexes

Vladimir Sergeevich Zhernakov, Igor Aleksandrovich Krivosheev, Dmitriy Albertovich Ahmedzyanov, Aleksandr Evgenevich Kishalov, Kseniya Vasilevna Markina, Vadim Dmitrievich Lipatov

56-62
- PDF (Русский)
New onboard gas turbine engine diagnostic algorithms based on neural?fuzzy networks

Sergey Vladimirovich Zhernakov, Artur Tagirovich Gilmanshin

63-68
- PDF (Русский)
Determination of nominal mode blade cascades, stages and compressor spools using the calculated methods and nomograms

Igor Aleksandrovich Krivosheev, Kirill Evgenevich Rozhkov, Nikolay Borisovich Simonov

69-78
- PDF (Русский)
The structural variations of high?temperature turbine blades for increase of its design life

Lyubov Aleksandrovna Magerramova

79-86
- PDF (Русский)
Efficiency evaluation of the burning process in turbine interblade channel for isothermal expansion realisation

Mariya Alekseevna Muraeva, Valeriy Fedorovich Haritonov, Ivan Mihaylovich Goryunov

87-92
- PDF (Русский)
Sources of uncertainty in aviation gas turbine engines starters design

Vladimir Vasilevich Chervonyuk, Mihail Yurevich Ryzhenko, Nikita Atamuradovich Muhammedov

93-99
- PDF (Русский)
Study the effectiveness of the dust devices

Anas Saidovich Gishvarov, Rufat Rinatovich Aitov, Arman Maratovich Aytumbetov

100-110
- PDF (Русский)
GTE (gas turbine engine) cycle with isothermal expansion in turbine

Mariya Alekseevna Muraeva, Ivan Mihaylovich Goryunov, Valeriy Fedorovich Haritonov

111-118
- PDF (Русский)

First Version of an Open Encyclopedia of Algorithmic Features

Aleksandr Sergeevich Antonov, Vadim Vladimirovich Voevodin, Vladimir Valentinovich Voevodin, Aleksey Mihaylovich Teplov, Aleksey Vyacheslavovich Frolov

150-159
- PDF (Русский)
Hybrid parallelization algorithm for numerical solution of control synthesis problem

Ashat Ibragimovich Diveev, Aleksey Sergeevich Uvarov, Damir Bulatovich Hamadiyarov

160-168
- PDF (Русский)
Investigation of the influence of numerical scheme stencil size on productivity of parallel hydrodynamic code

Sergey Valerevich Dyachenko, Yana Viktorovna Kochkareva

169-178
- PDF (Русский)
Numerical methods of integration modification for axisymmetric problems?solution

Vladimir Pavlovich Zhitnikov, Olga Rifovna Zinnatullina, Natalya Ivanovna Zhitnikova

179-182
- PDF (Русский)
Application of integrated automated control of production process in mechanical engineering

Aleksey Germanovich Lyutov, Yuriy Vasilevich Ryabov, Sergey Anatolevich Polezin

183-187
- PDF (Русский)
Situation?oriented databases: current state and prospects for research

Valeriy Viktorovich Mironov, Nafisa Islamovna Yusupova, Artem Sergeevich Gusarenko

188-199
- PDF (Русский)
Models of algorithms of management of innovative activity

Radik Rauitovich Rahmatullin

200-206
- PDF (Русский)
Supercomputer modeling in coefficient inverse problems of wave tomography with attenuation

Sergey Yurevich Romanov

207-214
- PDF (Русский)

Vol. 19 No. 2 (68) (2015): Вестник УГАТУ

Computer modeling of local ion nitriding process with effect of hollow cathode using example of gear detail

Multivariate model selection method for production of casting of aluminum alloys

Modeling technology stresses in connection "plate-ring"

Purpose of the modes turning details of gas-turbine engines on temperature in the cutting zone

Research of of the possibility to control the shape of the machined hole at honing

The definition of initial deformations in the cylindrical parts surface layer by Finite Elements Modeling method using PATRAN/NASTRAN program complex

Creep and long?term strength of micro?GTU turbine disk

Methodology of comprehensive plan optimization experiment in technical systems

Prognosis of primary characteristics of two spool mixed flow turbofan for perspective aviation complexes

New onboard gas turbine engine diagnostic algorithms based on neural?fuzzy networks

Determination of nominal mode blade cascades, stages and compressor spools using the calculated methods and nomograms

The structural variations of high?temperature turbine blades for increase of its design life

Efficiency evaluation of the burning process in turbine interblade channel for isothermal expansion realisation

Sources of uncertainty in aviation gas turbine engines starters design

Study the effectiveness of the dust devices

GTE (gas turbine engine) cycle with isothermal expansion in turbine

First Version of an Open Encyclopedia of Algorithmic Features

Hybrid parallelization algorithm for numerical solution of control synthesis problem

Investigation of the influence of numerical scheme stencil size on productivity of parallel hydrodynamic code

Numerical methods of integration modification for axisymmetric problems?solution

Application of integrated automated control of production process in mechanical engineering

Situation?oriented databases: current state and prospects for research

Models of algorithms of management of innovative activity

Supercomputer modeling in coefficient inverse problems of wave tomography with attenuation

Information

Make a Submission

Language