Vol. 21 No. 4 (78) (2017): Вестник УГАТУ

USATU-85

Nikolay Konstantinovich Krioni

3-5
- PDF (Русский)
Science at USATU

Igor Vasilevich Aleksandrov

6-10
- PDF (Русский)

Study of influence of low-temperature ion nitriding on the structure and properties of titanium alloy vt6

Rashid Denislamovich Agzamov, Aynur Firgatovich Tagirov, Aleksey Aleksandrovich Nikolaev

11-17
- PDF (Русский)
Investigation of the influence of threaded inserts on the stressed-deformed state of the threaded connection

Vladimir Sergeevich Zhernakov, Tamara Nikolaevna Mardimasova, Marat Rashitovich Arslanov, Vadim Rinatovich Akbashev

18-24
- PDF (Русский)
Simulation of electrochemical machining at conditions of non-monotonical dependence of anodic potential on current density

Vladimir Pavlovich Zhitnikov, Natalya Mihaylovna Sheryhalina, Askar Aleksandrovich Zaripov

25-31
- PDF (Русский)
Self-similar axisymmetric electrochemical machining simulation

Olga Rifovna Zinnatullina, Natalya Mihaylovna Sheryhalina, Natalya Ivanovna Zhitnikova

32-40
- PDF (Русский)
The integral method of splines for calculation of the natural frequencies of the rod and its capabilities

Viktor Pavlovich Pavlov

41-49
- PDF (Русский)
Investigation of the influence of ionic nitrogen on the structure and mechanical properties of the instrumental quick-steppe steel R6M5 after the SPD

Larisa Rafilevna Shayhutdinova, Ernst Fashievich Hayretdinov, Vil Dayanovich Sitdikov, Yuldash Gamirovich Husainov, Roman Sergeevich Esipov

50-56
- PDF (Русский)
Description of the geometry of the outer surface the pen of the working blades of the axial compressor GTE twodimensional splines of degree 2 defect 1

Viktor Pavlovich Pavlov

57-68
- PDF (Русский)

Mathematical modeling of intensified heat exchange in pipes with turbulizers at turbulent current at high Reinolds numbers

Igor Evgenevich Lobanov

69-77
- PDF (Русский)
Adaptive gas turbine engine temperature measuring instrument with model error correction

Valeriy Ivanovich Petunin, Radmir Railevich Sibagatullin, Arkadiy Isaakovich Frid

78-85
- PDF (Русский)
Parametrics diagnostics of single-GTE on the basis of neural network modeling workflows

Zhulen Selestin Raerindzatuvu, Anas Saidovich Gishvarov

86-96
- PDF (Русский)

Modern development problems of technical and operational documentation on aviation technics within the framework of management of the product life cycle

Aleksey Sergeevich Gavzov, Natalya Evgenevna Zaykina, Valeriy Alekseevich Kaliy, Kirill Aleksandrovich Kushev, Mihail Sergeevich Savchenko

97-103
- PDF (Русский)
Fractional differentiation approach to modeling of fluid filtration processes in complex heterogeneous porous media

Rafail Kavyevich Gazizov, Stanislav Yurevich Lukaschuk

104-112
- PDF (Русский)
Fuzzy cognitive modelling for prevention risk situations on objects of critical infrastructures

Larisa Aleksandrovna Ginis, Anna Evgenevna Kolodenkova

113-120
- PDF (Русский)
Measuring probability density of ergodic random having linear correlation function

Aleksandr Ivanovich Zaiko

121-128
- PDF (Русский)
A probabilityrepresentation of solutions of wave equations, and the function of Greene

Viktoriya Damirovna Kadyrova, Farit Sagitovich Nasyrov, Dilara Ayratovna Suchkova

129-135
- PDF (Русский)
Models and methods of adaptive control of learning with the use of aggregative training modules

Minasova Natalya Sergeevna, Sergey Vladimirovich Tarhov, Tarhova Lyaylya Mukaddasovna

136-142
- PDF (Русский)
Parallel evolutionary algorithms for solving optimization problems in structural bioinformatics

Sergey Vladimirovich Poluyan, Nikolay Mihaylovich Ershov

143-152
- PDF (Русский)
AlgoWiki: some aspects of algorithm properties investigations with Householder QR-decomposition studying as an example

Aleksey Vyacheslavovich Frolov, Aleksey Mihaylovich Teplov

153-162
- PDF (Русский)
To the synthesis of adaptive systems for automatic control of multiply connected electric drives with a reference model and with searchless algorithm of identification

Zimfir Mahmutovich Hasanov, Oleg Zimfirovich Hasanov

163-172
- PDF (Русский)

Vol. 21 No. 4 (78) (2017): Вестник УГАТУ

USATU-85

Science at USATU

Study of influence of low-temperature ion nitriding on the structure and properties of titanium alloy vt6

Investigation of the influence of threaded inserts on the stressed-deformed state of the threaded connection

Simulation of electrochemical machining at conditions of non-monotonical dependence of anodic potential on current density

Self-similar axisymmetric electrochemical machining simulation

The integral method of splines for calculation of the natural frequencies of the rod and its capabilities

Investigation of the influence of ionic nitrogen on the structure and mechanical properties of the instrumental quick-steppe steel R6M5 after the SPD

Description of the geometry of the outer surface the pen of the working blades of the axial compressor GTE twodimensional splines of degree 2 defect 1

Mathematical modeling of intensified heat exchange in pipes with turbulizers at turbulent current at high Reinolds numbers

Adaptive gas turbine engine temperature measuring instrument with model error correction

Parametrics diagnostics of single-GTE on the basis of neural network modeling workflows

Modern development problems of technical and operational documentation on aviation technics within the framework of management of the product life cycle

Fractional differentiation approach to modeling of fluid filtration processes in complex heterogeneous porous media

Fuzzy cognitive modelling for prevention risk situations on objects of critical infrastructures

Measuring probability density of ergodic random having linear correlation function

A probabilityrepresentation of solutions of wave equations, and the function of Greene

Models and methods of adaptive control of learning with the use of aggregative training modules

Parallel evolutionary algorithms for solving optimization problems in structural bioinformatics

AlgoWiki: some aspects of algorithm properties investigations with Householder QR-decomposition studying as an example

To the synthesis of adaptive systems for automatic control of multiply connected electric drives with a reference model and with searchless algorithm of identification

Information

Make a Submission

Language